Programming a Polaroid TV Remote: Step-by-Step Guide

A universal remote helps the user in operating more than one electronic remote-controlled device using a single remote. The Polaroid TV remote helps in syncing with four different devices at one time. With the help of this remote, the user can perform all the tasks supported by the target device. However, unlike many universal remotes available in the market, there is no “Code Search” feature in the Polaroid TV remote. Therefore, the user has to manually program the remote using the codes given below. In this article, there is a clear and concise description of How to program your Polaroid TV Remote. The user has to follow the given steps properly to manually program the Polaroid TV remote.

Note: In the list of codes given below, there are multiple codes available to suit different devices. The user has to choose the right code suited for the target device. As the Polaroid TV remote does not support the “Code Search” feature, which helps in automatic syncing, the user has to do it manually using the correct code.

Polaroid TV Remote Programming Code List

In this part of the article, there is a list of codes given which have to be used while programming. The programming procedure is the same for every device but the code is different. So the user has to make the choice correctly.

Ge Universal Remote Codes For Polaroid Tv

RCA Universal Remote Codes For Polaroid Tv

Philips Universal Remote Codes For Polaroid Tv

Polaroid Tv Remote Code Comcast

Spectrum Remote Code For Polaroid Tv

VIZIO Universal Remote Codes For Polaroid TV

Xfinity Remote Codes For Polaroid Tv

Code For Polaroid Tv One For All Remote

Polaroid Tv 3 Digit Remote Codes

678

Polaroid Tv Remote Codes For Directv

Sky Remote Code For Polaroid Tv

990 

Polaroid Tv Remote Codes For Dish Network

Polaroid Tv Codes For Uverse Remote

One For All Remote Codes Polaroid Tv

Polaroid TV Universal Remote 4 Digit Codes

How to Setup a Polaroid Remote With Code

Step 1: Switch on the target device.

[Tips: Before switching on, ensure that the power cable of the device is properly connected. Furthermore, it is suggested to use new batteries in the remote for better performance.]

Step 2: Point the remote towards the target device.

[Tips: Make sure that there is no obstacle in front of the IR sensor of the target device.]

Step 3: Press the button respective to the target device.

[Tips: For instance, press the “TV” button for television.]

Step 4: Press and hold the “SET” button until the light on the remote flashes three times.

[Tips: This signifies that the remote has entered programming mode.]

Step 5: Using The number keys, enter the right code for the device. Once the code is entered, the light will flash twice.

Step 6: Using the number keys, designate the type of device for which the remote is being programmed. Press “0” for cable/satellite box, “1” for TV, “2” for DVD player and “3” for VCR or an audio device.

Step-7: After the device has been chosen, press the power button first and then keep pressing the “CH+” button once in every two or three seconds till the device switches off.

Step 9: Press and hold the “Set” button till the light on the remote flashes for two times.

[Tips: This signifies that the code has been integrated with the remote.]

Step 10: Turn the device back on and check if the other buttons on the remote are working properly or not.[Tips: If they are not working properly, it means the programming was not successful. The user will have to repeat the steps from the beginning using a different code from the list.]

Program Polaroid TV Remote “Code Search Method”:

STEP 1: Switch “ON” the device. Keep the remote in front of your device.

STEP 2: Press and hold down the “TV” button from your “polaroid tv remote”.

STEP 3: After that press the “SETUP” button from your remote. Press the button till “RED” light blinks “twice”. This light is just to indicate to you that your program is in the learning process.

STEP 4: Enter the “CODE” from your “instruction booklet” by using your remote number pad.

STEP 5: Keep the remote in front of your “TV” and press the “POWER” button until your screen is switched “OFF”.

Switch “ON” your tv if your tv is “on” then congratulation your code is saved successfully. If this is not happening then try this method while using another code 4-5 times at least if this not work then try our other method which is given below.

Program Polaroid TV Remote “Instruction Booklet”:

STEP 1: Switch “ON” your “TV”. Keep the remote in front of your device.

STEP 2: Press and hold down the “SETUP” button from your remote.

STEP 3: Enter the code “9-9-1”. It is a universal remote control code.

STEP 4: Press and hold down the “POWER” button from your remote control. Along with the “CH +” button until your device switches “OFF” automatically.

Your remote is programmed successfully. If your remote is not working perfectly then don’t worry try our other method which is given below. I am damn sure this method works for you and solves your problem. This method is given below.

Program Polaroid TV Remote “Manual Configuration”:

STEP 1: Switch “ON” your device and keep the remote in front of the device for which you want to program.

STEP 2: Press and hold down the “SETUP” button or “MAGIC” button. The “SETUP” button is replaced by the “MAGIC” button in some of the remotes.

STEP 3: Enter the “CODE” from your “INSTRUCTION BOOKLET” for programming.

STEP 4: Press any key from your remote that you want to “program” for example “TV  VOLUME +” button.

STEP 5: Press and hold down the corresponding function key from your remote control.

STEP 6: At last “RED” light blinks once at a time. It indicates that your coding is saved successfully.

STEP 7: Your “TV VOLUME +” is saved successfully for your universal remote control.

Read Also: Official Philips Universal Remote Codes List

Now you can enjoy your entertainment device. I hope your problem is solved. If not then repeat this process starting at least 3-4 times with other codes. At last press and hold the “SETUP” or “MAGIC” button to complete the programming session. Now your “Polaroid TV Remote” program is successful.

Polaroid Universal Remote 3 Digit Code list

4 Digits Polaroid TV Universal Remote Code List

Polaroid TV Universal Remote 5 Digit Codes List

Philips Remote Code List – Polaroid TV

Polaroid Remote Codes List – Comcast

RCA Universal Remote Code List Polaroid