Lg Blu Ray Remote Codes & Programming Instructions [2024]

If you are tired of maintaining more than one remote control for different devices in the household, universal remotes are the solution, which helps in operating multiple devices through only one remote. However, it is needed that the target device should be supporting the use of a universal remote. The LG Blu-Ray player supports any type of universal remote. The only thing that the user has to do is to program the remote using the correct code and the remote is good to go with the Blu-Ray player.

This article is about the Remote codes and Programming Instructions for the LG blu ray players. Following the steps mentioned in the instructions properly will help the user to use any universal remote with his/her LG Blu-Ray player.

Note: This article consists of a list of codes that are meant to be entered while programming a universal remote for a LG Blu-Ray Player. It is suggested to try the codes colored in blue from the list. If any of those codes do not work, then try the remaining ones.

Remote code Programming Instructions for LG blu ray player

The user needs to perform a short programming phase before the remote becomes ready to be used for the LG Blu-Ray player. However, the user needs to choose the proper code for programming. The steps for programming are given below:

Step 1: Turn on the Blu-Ray player.

[Tips: You are suggested to ensure the electric connection of the device to be proper as well as the batteries inside the remote to be in well condition.]

Step 2: Select the device by pressing on the designated button.

[Tips: You should press “Blu-Ray Player” on the remote.]

Step 3: Press and hold the “Set-up” button until the light flash appears.

[Tips: The ‘light flash’ refers to the device being in “Learning Mode”.]

Step 4: Enter the code selected from the above list.

[Tips: Select the code appropriately as much as possible.]

Step 5: Point the remote towards the device and then press and hold the power button.

[Tips: The IR sensor of the device generally resides somewhere near the screen. Point the remote to that direction for better results.]

Step 6: Release the power button when the screen switches off. 

Step 7: Switch on the device once again to check if the programming was successful or not. 

[Tips: If the programming was successful for using the correct code, the remote will be working properly for the device. However, if the remote seems to be not working properly, that means the programming was unsuccessful. The user has to repeat all the steps from the beginning using another code from the code list.]

NOTE: If you remove the batteries then you have to program your remote control again. To control your device with blu-ray remote control.

Lg Blu-Ray 5 Digit Remote Codes

4 Digit Lg Blu Ray Remote Codes

3-Digit LG Blu-Ray Universal Remote Codes