Program Your Xfinity Remote to Control Your Element TV: Easy Step-by-Step Guide

Learn how to program your Xfinity remote to control your Element TV in this easy-to-follow guide. We’ll walk you through the steps step-by-step, so you can be up and running in no time.

Xfinity Remote Codes for Element TV

The remote codes for element tv are listed here.

More recent codes Comcast Xfinity remote codes for Element TV 5 digit Cox Universal -Remote codes for Element TV-

Codes for Element TV on the RCA 3 in 1 Universal Remote-

A Guide to Programming the Element TV’s Universal Remote

Before you begin programming the universal remote control to control the Element TV, double-check that all of your devices are properly connected. Check to see that the batteries in the universal remote are still functional.

Instructions for Programming

Program the remote control directly using the code(s) provided above.

Enter Configuration Mode

Keep the SETUP button pressed and held down on the remote until the red light on the remote illuminates. SETUP button should be released. The red light will continue to illuminate.

NOTE: The red light may be a little light on the remote’s top or it may be the power on/off button.

By tapping the button, you can select the device type.

To control a device, press and release the device button on the remote. The red light will flash once and then remain illuminated.

NOTE: If your remote does not include a device button for your device type, you can use any device button on the remote.

Enter the device’s serial number.

Enter the codes indicated above using the number buttons on the remote. After entering the fourth digit, the red light will go out.

Evaluates the outcomes

Aim the remote control at the gadget. Test the remote’s buttons to ensure that the gadget responds as expected. If the buttons do not work, return to Step 1 and use the next code in the list.

Repeat this procedure for each additional gadget.