Trisonic TS-RC413 Universal Remote Control Programming

This tutorial will teach you How to Program Trisonic TS-RC413 Universal Remote Control in two ways.

Because most universal remote controls do not come with batteries, you will need to purchase two triple A batteries after unpacking your remote control.

You open the rear of the remote control and insert the batteries before closing it.

Trisonic TS-RC413 Universal Remote Control Programming

Before purchasing batteries for your universal remote control, be sure you know what kind you need.

Method 1: Using Direct Code Entry, program the Trisonic TS-RC413 Universal Remote Control.

First, get the four-digit code for your brand’s equipment (TV, DVD, CABLE, VCR, SAT, Auxiliary) and write it down or memorize it. It will be required in step 4. My television is a Samsung, and I discovered the code 0309. You may also make a circle around the code.

Second, press and hold the “Code Search Button” button for around 4 seconds, until the LED indication light illuminates, then release the button. The LED light will remain illuminated.

Third, press and release the device programming button (TV, DVD, CABLE, VCR, SAT, Auxiliary). The LED light will flash once and then turn off.

Fourth step: Using your remote’s keypad, input the four-digit brand code that you discovered in the first step.

If the code is right, the LED light will turn off. If the code is wrong, the LED red light will blink and stay on, allowing you to input alternate codes.

5. Fifth, use the newly programmed universal remote control to turn off the device, then turn it back on by pushing the “Power” button and checking the other buttons. If they function properly.

Congratulations, you have completed your task. If they don’t work, try alternate codes from the same brand of device, since most brands have more than one code in the code list. Alternatively, use the auto search code approach to program it.

Trisonic TS-RC413 Universal Remote Control Programming

Method 2: Programming the Trisonic TS-RC413 Universal Remote Control with an Auto Search Code.

First, locate and do not push the “MUTE” button on the remote control. Just keep the place in mind. It will be required in step 5.

Second, manually turn on the gadget you want to operate.

Third, press and hold the “Code Search” button for around 4 seconds, until the LED indication light illuminates, then release the button. The LED light will remain illuminated.

Fourth, press and release the device programming button (TV, DVD, CABLE, VCR, SAT, Auxiliary). The LED light will flash once and then turn off.

Fifth, point the remote control near the device, then press and release the “CHAN +” button. The remote control will begin looking through the codes automatically.

The LED light will begin to flash. To preserve the code, press the “MUTE” button as soon as the TV channel changes.

Important note: if you wait more than one second before pushing the “MUTE” button, it will advance to the next code. As a result, you must restart from step 1 or use the “CHAN – ” Down button to return to the right code before hitting the “MUTE” button.

Sixth, use the newly programmed universal remote control to turn off the device, then turn it back on by pushing the “power” button and checking the other buttons. If they function properly.

Congratulations, you have completed your task. If they don’t work, try again or use the Direct Code Entry technique to program it.

This Trisonic Universal remote control allows you to program up to six different devices, including TV, DVD, CABLE, VCR, SAT, and Auxiliary.