Reprogram RCA Universal Remote: Easy Step-by-Step Guide

Do you have an RCA universal remote that’s not working properly? Maybe you’ve lost the original programming code, or maybe you’re trying to program the remote to control a new device.

Whatever the reason, reprogramming your RCA universal remote is a quick and easy process. In this step-by-step guide, we’ll walk you through the entire process, so you can get your remote up and running again in no time.

Resetting an RCA Remote 

If You’re here to know about resetting an RCA remote, read this article. You’ll surely come to know how to reset an RCA remote.

To understand better we’ve mentioned the step-by-step process for resetting and reformatting an RCA remote. 

STEP:1 Firstly, Pull off the battery cover, located on the back of the RCA remote.

STEP:2 Now, take off the batteries from the remote, then turn the remote frontside to look at its number pad.

STEP:3  Additionally, hold on the “1” number button on the number pads of the remote for 60 seconds, then release the button and wait at least 10 seconds.

To clear the remote’s memory, you have to repeat this method about three to four times.

STEP:4 Next, you have to place the batteries back of the RCA remote and close it with the battery cover now, your remote is ready to program.

How to know If the Remote is working?

Follow the below steps, to check whether IR Remote is sending a signal

Step-1 Pick a device to use as a Digital camera and make sure to TURN ON the camera

Step-2 Next, try to point the end of the remote with the IR emitter at the camera or the camcorder lens.

Step-3 Now, look at the LCD screen

Step-4 Lastly, press and hold down any button on the remote.

How do you Reset your one for all the remotes?

Factory Reset- one for all remote

1. Hold on to the MAGIC for 3 seconds, and then an LED light will blink twice.
2. Press the digit 981, and in about 3 seconds, the LED will blink 4 times.
3. Now, your remote has been reset to the factory setting.

How do you find Insignia TV has a reset button?

If the Insignia Tv is not turned on, then you can try it out with a power reset. While performing a power reset unplug the set from the outlet. Now, hold down the power button for at least one minute.

How do you Reset your LCD TV?

Click at the menu button on the remote or television, then the TV menu will appear. Now, select FACTORY RESET, then press the MENU button and, select YES now, the TV is reset to its default configuration.

CONCLUSION

 I hope the above methods and steps help you to reprogram your RCA remote and Samsung TV remote. If you have any issues, then please comment below and we’ll help you.