Mediacom Remote Programming Codes & Guide

Mediacom is considered as one of the US’s largest cable TV service providers. The customers are given universal remotes besides the Mediacom Cable Box. Apart from the Mediacom Cable Box, you can access several devices across your home using the remote control. Access all your devices from the comfort of your couch using the universal remote control. Mediacom remote can multitask and provide easy access to all your devices.

The Mediacom universal remote control is the ultimate requirement for your home. It is an award-winning technology that transforms your device into a powerful remote. It gives easy access to your television and other home devices, including Blu-ray Disc players, cable boxes, audio receivers, and much more.

It comes in a neat, small package. It fits perfectly in your hands and can be programmed to work with four devices simultaneously. You will get the complete guide about Mediacom Remote Programming Methods and TV Codes List from this article.

Note: Different home entertainment devices used for home entertainment require multiple remotes to operate, which is quite troublesome. Mediacom saves your time and energy by replacing one remote with a bunch of different remotes for different devices. Keep reading the rest of the article to learn about the features and other information. 

Mediacom Remote Programming Codes List

Before programming the universal remote control to work with your devices, you should be aware of the programming codes. The codes are required to connect to the device you want to control.

You can find the model of your device and its respective programming code. You can keep checking it with all the codes until you find your device’s exact match.

Mediacom Remote Programming Codes

4-digit Mediacom Remote Codes for TV

5-digit Mediacom Remote Code for TV

Mediacom Cable Remote Programming Method

If you want an easy yet reliable replacement for your device’s setup remote to control your home entertainment related equipment, Mediacom Remote can help you. You can pair your Mediacom remote with your favourite entertainment device by following a few simple steps.

Although there are countless methods of programming a Mediacom remote, this article discusses the simplest and most effective programming methods. You can program a Mediacom remote in two different ways. 

Method 1. By entering the correct code for your particular TV model

Method 2. Using the automated feature of the remote 

The process can be faster depending on your device’s brand. Follow these simple steps to activate your universal remote control. 

Mediacom Remote without Code programming method

A very simple and reliable method of programming a media com remote is the without code programming method.

In this case you have to perform certain steps sequentially and your remote automatically performs pairing with your desired device by signalling.

Before doing this programming you must check the functionality of your Mediacom remote. You can open the battery slot of your remote and remove and re-insert the battery or if necessary you can change the battery of your Mediacom remote.

Below is described the method of programming Mediacom remote without code in simple few steps.

Step 1. Press and hold the SET button while pressing the number 0 (zero) button of your remote control

i. You will need to press the “0” button four times with the Set button.

ii. A tour of all the available codes is displayed.

iii. You can find the exact code that can be used to communicate with your TV.

Step 2. By this time, the light of the remote control (usually red) will glow steadily.

i. Now press the ON button intermittently and pause.

ii. Press – release (wait 1 second) – Press – release (wait 1 second).

iii. Repeat this method until the TV turns off.

Step 3. After the TV is turned off, press the OK or ENTER button to confirm the correct code.

i. Now you are all set to use your Mediacom Remote to control your desired device.

ii. You can verify the programming success of you Mediacom Remote by controlling the basic functions of your device.

iii. In case if you face any glitching or freezing issue after programming , you can reset the programming and repeat the programming process again.

Mediacom Remote Programming Method with Code

If you fail to perform programming of your desired device with your Mediacom remote or encounter any glitches, you can follow the With Code Programming Method. In this case you have to enter the specific programming code after performing certain initial steps according to the type and model of your desired device.

From the previous part of the article you can find the list of different programming codes for your Mediacom remote according to the specific device model, type and brand.

You can learn Mediacom remote with code programming method from below discussion.

Step 1. Check for active batteries in your remote before programming.

[Tips: Ensure the remote is working correctly, so the programming process is not interrupted. ]

Step 2. Turn on the TV that you wish to program with your remote control.

Step 3. Press the MODE button and hold it for a few seconds on your remote and wait until it will blink once. After it flashes, press the SETUP button and wait until it blinks twice.

Step 4. Enter the codes using the number buttons on your remote and proceed with the programming.

Step 5. Keep the remote pointed to the device, and hold the channel up button until the device turns off. If the television switches off, it indicates that your device has been programmed correctly using the given codes.

Step 6. Press the SETUP button on your remote and save the code.

[Tips: If the TV fails to switch off, there is an error in the programming process, or the codes may be invalid. Under such circumstances, repeat the whole process or try different codes.]