Spectrum Universal Remote Programming Codes | Easy Guide

Spectrum universal remote programming codes can be a lifesaver, especially if you have a lot of different devices in your home. With a universal remote, you can control all of your devices with a single remote, which can make your viewing experience much more streamlined.

This blog post will show you how to program your Spectrum universal remote to control your TV, cable box, and other devices. The process is simple and can be done in a few minutes.

Spectrum Universal Remote Programming Codes rc122

In the below table, we have listed the spectrum universal remote codes rc122, and from the list, you need to select a code of your device and brand name and enter it using the number pad of your spectrum universal remote to control your device with spectrum universal remote.

Spectrum Universal Remote Codes for Lg TV

1079 1228 1340 1234 1018 1318 1035 1264 1225 1098 1013 1178 1373 1307

Spectrum Universal Remote Codes for Vizio TV

1333 1380 1293 1299 1081 1092 1187 1228 1306 1230

Spectrum Universal Remote Codes for Emerson TV

1241 1172 1018 1361 1019 1017 1023 1251 1027 1020 1014

Spectrum Universal Remote Onn Codes

1098 1228

Spectrum Universal Remote Codes for Emerson TV

1027 1172 1251 1018 1014 1017 1023 1020 1361 1241 1019

Spectrum TV Remote Codes Element

1228 1065 1098

GE Universal Remote Codes Spectrum

1179 1193 1022 1018 1164 1003 1004

Spectrum Remote TV Codes Hisense

1041 1279 1098 1228

Spectrum TV Remote Codes Insignia

1275 1155 1098 1196 1189 1228 1251 1271 1017 1182 1267 1116

Spectrum TV Remote Codes Lg

1373 1018 1178 1234 1340 1307 1225 1098 1079 1264 1013 1228 1035 1318

Programming Spectrum Remote rc122

The following steps are the instructions of programming spectrum remote rc122, you need to follow it properly to program well.

STEP:1 Switch on your device that you want to connect with the Spectrum universal remote.

STEP:2 Press the OK\SELECT button and the device button simultaneously and hold it until the device button flashes twice.

STEP:3 Now, select the device code from the above list and enter it 

STEP:4 If the device code is correct, a light will blink three times on the device button.

STEP:5 When the code is incorrect, the light doesn’t blink then, you have to select another code from the list and enter it using the same above process. 

STEP:5 After the light blinks, you point the remote towards your device and press the power button and the device will turn off.

STEP:6 When the device is turned off, you need to press the power button again. When the device turns on try to check your spectrum remote keys as if it is working or not. if it is not working you need to select another code from the above listing and enter it using the above procedure.