RCA Universal Remote Code for Sanyo & Program Guide

If you have an RCA universal remote and a Sanyo TV, you can easily program the remote to control your TV. This guide will show you how to do it step-by-step, so you can be up and running in minutes.

Rca Universal Remote Codes for Sanyo TV

The following are the three, four, and five-digit Sanyo TV codes for RCA universal remote controls:

3-Digit Code for Model RCU300, RCU310, RCU410, Etc.

3-Digit Codes for Model RCU400R3, RCU500, Etc.

3-Digit Codes for Model RCU300T, RCU404, Etc.

4-Digit Code for Model RCR804BR, RCRH02BR, Etc.

4-Digit Code for Model RCR350, RCR450, RCR815, Etc.

4-Digit Codes for Model [ RCR612, RCR812, RCR860 ]

4-Digit Codes for Model [ RCR412B, RCR3273/3373 ]

How to Program a Rca Remote to a Sanyo TV

Step-1 Turn on the device you want to program rca remote to sanyo tv manually (TV, VCR, DVD, etc.).

Step-2 Then, release pressure on the remote’s CODE SEARCH/SETUP button when the INDICATOR LIGHT appears.

Step-3 Press and release the button on the gadget you’re configuring to begin the process (TV, VCR, DVD, etc.).

Press AUX, then the AUX button on the device you want to use for AUX. Afterwards, the INDICATOR LIGHT will remain on.

Step-4 Using the number buttons on the GE Universal Remote, type in the three or four digit rca sanyo tv codes for your device. After you enter your code, the INDICATOR LIGHT will go out.

Step-5 Press the POWER button on the remote control while pointing it at the device (TV, VCR, DVD, etc.). Your phone or tablet should shut down.

Programming a Sanyo TV Remote The Manual Approach:

The Sanyo Universal Remote Control may be quickly programmed using a button code, making it a breeze to use. The device’s model and manufacturer are identified by the lock code.

Step-1 You must first “activate” the device in order to use it.

Step-2 The second step is to use the “Sanyo universal remote control” by selecting “TV”.

Step-3 As soon as you see “Flash,” you’re in “learning mode,” so continue pressing and holding the “Setup” button on the universal remote.

Step-4 : Enter your rca sanyo tv codes “lock code” (operation manual).

Step-5: Simply push the power button on your TV with the remote after you’ve completed this procedure. Once the screen has been turned off, you can let go of the power button.

Step-6 Using your TV as a universal remote control is now a breeze. Make sure to use alternative “rca universal remote codes for sanyo ” in the same part of the reference table if your gadget doesn’t function.