How to Get RCA Universal Remote Codes for Sanyo TV?

The universal remote controls help the users in controlling multiple remote-controlled electronic appliances with a single remote. Even though the users can operate only one device at once using a universal remote, another device can be operated after programming the remote for the new device.

In case you’re original remote for Sanyo tv has been lost or broken down, you can use the RCA universal remote just by programming. The programming steps are also very simple, making it performable for everyone.

The only thing that needs to be changed in the programming of a different device is the code. In this article, RCA universal remote code and Programming Method for sanyo TV have been discussed in detail.

The user just needs to simply follow these steps and use the universal remote for a new device.

Note: Sanyo TV can be connected to any type of universal remote. These remotes need to be programmed using the codes provided in the list below. These codes are of three, four and five digits. The user has to choose the appropriate code from the list for the remote to be correctly programmed.

List of RCA Universal Remote Codes for Sanyo TV

In this part of the article, a full list of codes have been provided that will be needed while programming the remote. While the steps of the programming are the same for all devices, these codes are unique to different device models.

Therefore, the user has to choose the correct code from the list for proper function.

Sanyo TV codes for RCA remotes : 3 digit

Sanyo TV codes for RCA remotes: 4 digit

Sanyo TV codes for RCA remotes: 5 digit

RCA Universal Remote Code Program Method for Sanyo TV

Step 1: Turn the TV on and keep the remote ready.

[Tips: It is suggested to install new batteries in the remote for better performance.]

Step 2: Point the remote towards the device and press the device button.

[Tips: As you are programming the remote for the TV, press the “TV” button.]

Step 3: Hold the button until the power key turns on.

[Tips: This signifies that you have entered programming mode.]

Step 4: Enter the appropriate code from the list prepared before.

[Tips: Regardless of the number of digits in the code, i.e. three digit code, or four digit code, or five digit code, after entering the last digit, the tv will turn off. This is a symbol of choosing the right category of codes.]

Step 5: Hold the device button again to turn the device back on.

[Tips: If the device turns on, it signifies that the programming is completed almost correctly and the remote has been paired with the device.]

Step 6: To check if the programming is completely correct or not, press other functionalities buttons like volume-up, channel-up etc. to see if they are working properly or not.

[Tips: On successful programming, all buttons should work perfectly. If they are not working, it means the programming was unsuccessful.]

Step 7: In case of unsuccessful programming, the user will have to repeat all the steps again from the starting but using a different code.