Philips Universal Remote Codes for cl034

Do you want to replace your remote control with Philips CL034 universal remote control? Now, many time we have to do hassle and juggling with too many remote control. It proves a good replacement for your device’s remote control.

If you lost your remote control or it’s break down then it’s good replacement for your device. But to make  compatible according to your device then you have to program your remote control. Once you program your remote control then you can enjoy your remote control to control device.

Here we can provide you all the things like programming instruction as well as Philips Universal Remote Codes for cl034. All the universal remote codes are in the table.

You have to enter your device name and you get your codes in a few seconds in front of the device name. these codes are proved helpful for you at the time of the programming. Without wasting time move towards programming instruction.

Philips Universal Remote Cl034 Codes List

0414
0902
0801
0708
0639

Philips Universal Remote Cl034 Codes : Sony TV’s

0902

0708

0639

0801

0414

Philips Universal Remote cl043 Programming Instructions

Step1: Search the codes in the table according to your device. Because every device comes with its own make no. as well as model no. Like many videos, components come with 4 digit remote codes such as TV/DVD/VCR and cable satellite receiver. You get all the codes in the table.

Step2: turn on your device and keep your remote control in front of the device until the entire process of the programming cannot complete.

Step3: Now, you have to press and hold the “CODE SEARCH” buttons from your remote control. Release the button when the indicator light comes on.

Step4: press the “DEVICE” button according to your device. For example, you want to program your “TV” then you have to press the “TV” button from your remote control. The indicator light will be a blink and remain “ON”.

Step5: now, you have to enter the 4-digit codes. If you enter the correct code and the device accepts it then the indicator light turns “OFF”. If the indicator light didn’t turn “OFF” then try other codes. Try different codes if your device having multiple possibilities.

Step6: Now tap on the “POWER” button and then tap on the “PLAY” button or “CH+” button. After some time indicator light turns off. If this happened then move on to the different components.

With this programming instruction, you can program all the devices. You have to press the “DEVICE” button according to your device. Suppose you want to program “VCR” then you have to tap on the “VCR” button instead of other component buttons.