Program Universal Remote Using Rca Universal Remote Codes

These quick and easy rca universal remote codes and instructions are listed according to the brand name, follow the instructions given below to program your RCA universal remote control to use your TVs, DVDs, etc.

If you Always stuck with using multiple remotes to operate multiple devices in your home, the RCA Universal Remote is best option for getting rid of  multiple  remotes and having to find lost remotes. Our simple and  step-by-step programming instructions with a complete list of distant codes are here for your convenience.

RCA Universal remote control code list

You can instantly program your RCA remote control, for this we will apparently use the automated code search method. Creating a single RCA universal remote control takes some time, so it’s worth your endurance.

Before Programming your remote , make sure your remote has working batteries, all your devices should  be turn on. Make sure you have plugged in your devices, it will save you a lot of time. Make sure remote batteries are in working.

Turn on the the switch button of the home theater or device such as television, blu-ray that you want to program with remote RCA Universal remote control.

Step 1. Make sure the remote control’s  batteries are working.

Step 2. Press and hold the button of the home theater or devices such as television or blu-ray that you looking to program with the RCA universal remote control.

Step 3. Press and then release the button that corresponds to the device you are programming. The on/off of the remote control will blink and should remain on.

Step 4. The illuminated on / off button will turn off. Then he must get back on himself.

Step 5. Release both buttons after the on/off button turns back on. It should stay on.

Step 6. If the part you are programming does not turn off after 5 minutes, continue pressing the play button every five minutes until it turns off.

Step 7. Now press and release the back button. Wait to see if the piece comes back on and press it every few seconds until it does.

Step 8. Press and release the stop button to store the device’s programming in remote memory.

Step 9. Repeat each of the settings for each device you want to program.

There is an unfortunate possibility that the car code search will not work, we can use the direct code submission method to correct the circumstances.

Universal RCA remote configuration by direct code input method

Step 1. First ensure that the batteries are working in the remote control.

Step 2. Power on the devices such as television, blu-ray that you want to program with the RCA universal remote control.

Step 3. Press and hold the button on the universal remote that matches the device you are pairing. Enter the four or five-digit code from the list. Then release the power button of your device.

Step 4. The red indicator light should stay on to indicate you’re in pairing mode. If it doesn’t, repeat steps 2 and 3.

Step 5. Release both buttons after the on/off button turns back on. It should stay on.

Step 6. Now press and release the play button on the remote control. If the component you are programming does not turn off after 5 seconds, continue pressing the play button every five minutes until the component turns off.

Step 7. Now press and release the back button. Wait to see if the part comes back on and press it every two seconds until it does.

Step 8. Press and release the stop button to save the programming in the device to the remote control memory card.

Step 9. Repeat all the steps for each device you want to program.